3Shape Dental System 2.23.1.1

[R.Center]

R.Center добавил(а) новый ресурс:

3Shape Dental System - стоматологическая система для 3D моделирования и прототипирования.

Achieve higher productivity in your dental CAD designing ​

3Shape Dental System is a leading dental CAD design software with a comprehensive range of indications – including a growing number of AI-supported workflows.

Посмотреть вложение 4005

ACCESS A COMPREHENSIVE RANGE OF INDICATIONS​

Unleash your creativity and boost your lab’s productivity with intuitive designing and easy to use 'next-next'...

Узнать больше об этом ресурсе...

 

[hiroyama05]

Thank you for all the useful information.
It is very helpful.

After installing it, I tried to use it,
The following functions are not available.
It looks like the image below.
Can anyone help me?

1. cannot use Model Builder Express.
Is there anyone who can use it? If so, please tell me how to use it.

2. some items cannot be selected in Abutment.
I get an error as shown in the image and cannot use it.
Is there anyone who can use it? If so, please tell me how to use it.

3. 3Shape Communicate inbox is not working.
I get an error as shown in the image.
Is there anyone who can use it? If so, please let me know how.

 

[Dentol]

Thank you for all the useful information.
It is very helpful.

After installing it, I tried to use it,
The following functions are not available.
It looks like the image below.
Can anyone help me?

1. cannot use Model Builder Express.
Is there anyone who can use it? If so, please tell me how to use it.

2. some items cannot be selected in Abutment.
I get an error as shown in the image and cannot use it.
Is there anyone who can use it? If so, please tell me how to use it.

3. 3Shape Communicate inbox is not working.
I get an error as shown in the image.
Is there anyone who can use it? If so, please let me know how.

На этом скриншоте есть все ответы на ваши вопросы.

 

[hiroyama05]

На этом скриншоте есть все ответы на ваши вопросы.

So there is no corresponding dongle.
I thought there was something wrong with the configuration or installation, but I was mistaken.
With this dongle, implant models cannot be produced, so models of natural teeth can be produced...

Thanks.

 

[2begin]

Есть возможность добавить Ortho Analyzer?

 

[omen]

I cannot communicate with the 3shape communicate, too. Does somebody have a solution?

 

[Dentol]

Я думаю если каждый скачавший этот ресурс отпишется здесь, что у него не работает 3Shape Communicate inbox module он от этого не заработает. Хотя...... могу ошибаться))))

 

[Брат]

В описании же есть полный список модулей, которые поддерживает этот донгл. Видимо надо его и здесь продублировать

Спойлер: Full list of supported modules

Anatomy Design Full (90 client points, expiry date 26.02.2050)
Anatomy Design Virtual (90 client points, expiry date 26.02.2050)
CT Preparation (90 client points, expiry date 26.02.2050)
Dental Desktop (90 client points, expiry date 26.02.2050)
DentalDesigner Premium (90 client points, expiry date 26.02.2050)
DentalManager (90 client points, expiry date 26.02.2050)
Full Denture Design Module (90 client points, expiry date 26.02.2050)
Implant Bars/Bridge Design Module (90 client points, expiry date 26.02.2050)
Implant Studio (90 client points, expiry date 26.02.2050)
Implant Studio Planner (90 client points, expiry date 26.02.2050)
Implant Studio Surgical Guide (90 client points, expiry date 26.02.2050)
Model Builder (TRIOS scans only) (90 client points, expiry date 26.02.2050)
TRIOS Base (90 client points, expiry date 26.02.2050)
TRIOS Restoration (90 client points, expiry date 26.02.2050)

 

[omen]

thank you all

 

[peter9811]

3Shape Dental System v2.23.1.1 (last) https://reversing.center/resources/3shape-dental-system.732/
Если была установлена и активирована предыдущая версия DentalSystem удалять ее не обязательно. Можно просто накатить поверх новую версию.

Hello, I'm trying to install, but I can't. Always show me "no dongle".
I just got the last version, I have to install the old version first?

I got this problem: (I got the installation with the version DentalSystemInstaller2.23.1.1)

*** Hidden text: cannot be quoted. ***

The change on the date is necessary for the last version too? I having the same problem (after removing everything and starting from zero)

Any idea how to fix it?
Thanks

 

[Брат]

 

[peter9811]

*** Hidden text: cannot be quoted. ***

That's a good sing to follow. Thanks
I gonna try when I get home. I was already thinking on try on a emulate Windows version

I have a question. The install tool ask me for internet connection while installing, before to check the dongle. Is any way to bypass this? Or just let it go and block the .exe after the installation

 

[Брат]

That's a good sing to follow. Thanks
I gonna try when I get home. I was already thinking on try on a emulate Windows version

I have a question. The install tool ask me for internet connection while installing, before to check the dongle. Is any way to bypass this? Or just let it go and block the .exe after the installation

Why do you want to block his internet access? Is this requirement in the installation and activation instructions? How are you going to create an account to log into 3Shape Unite if you block it from accessing the internet?

 

[peter9811]

*** Hidden text: cannot be quoted. ***

Для просмотра скрытого содержимого необходимо Войти или Зарегистрироваться.

 

[peter9811]

Для просмотра скрытого содержимого необходимо Войти или Зарегистрироваться.